એલઇડી લાઇટિંગ ઉદ્યોગમાં નવું મનપસંદ: ઓટોમેટિક ગ્લુ ડિસ્પેન્સરની અમર્યાદિત સંભવિતતાનું વિશ્લેષણ

After ensuring that Kaiwei sealing glue dispenser is powered on normally, the switch in the equipment is turned on normally, the equipment is grounded, and the air pipe and material pipe are installed normally, and the workbench and equipment are fixed (as shown below). We need to weigh and measure the glue A and glue B of the fully automatic sealing glue dispenser. Of course, it is also very important to mix the polyurethane sealing foaming glue A evenly! First of all, our Kaiwei fully automatic sealing glue dispenser is not controlled by pressure. The amount of glue output is controlled by the metering pump, so it is very accurate (as shown below).

We are not controlled by pressure. Generally, other people's equipment is pressure-controlled. If the pressure is too high, it will cause glue to spray out and the amount of glue is too much, affecting the appearance of the sealing product; if the pressure is too low, uneven glue dispensing and leakage will occur, thus affecting the quality of the sealing product.

However, with our Kaiwei's fully automatic sealing glue dispensing equipment, these problems can be well avoided. Secondly, the choice of nozzle tube of the sealing equipment glue dispenser is also very important! So, how to choose a suitable nozzle tube? When applying glue, the diameter of the nozzle tube should be the same as the radius of the glue point; during the glue dispensing work, the nozzle tube can be selected according to the size of the product; products of different sizes that need to be sealed should use suitable nozzle tubes, which is conducive to the glue dispensing operation of the sealing glue dispensing machine. There will be no problems such as glue dripping and glue leakage.